Step-by-Step Guide to Replace Your Power Steering Pump

Excerpt: Experiencing hard steering, whining noises, or fluid leaks? It might be time to replace your power steering pump. Our detailed step-by-step guide helps Acura owners replace their pump and restore smooth control to their drive.

Symptoms of a Failing Power Steering Pump

• Whining or groaning noises when turning the wheel
• Stiff or difficult steering
• Visible power steering fluid leaks
• Foamy or discolored power steering fluid

What You'll Need

• New or refurbished OEM power steering pump (specific to your Acura model)
• Power steering fluid (Honda/Acura recommended)
• Socket set and wrenches
• Drain pan
• Jack and jack stands
• Hose clamp pliers

Step-by-Step Replacement Instructions

Step 1: Disconnect the Battery

Safety first—disconnect the negative battery cable to prevent any electrical issues.

Step 2: Locate and Remove the Belt

Using the tensioner, relieve the tension and remove the serpentine belt from the power steering pulley.

Step 3: Drain the System

Place the drain pan underneath the power steering pump. Disconnect the return line to drain old fluid.

Step 4: Disconnect Hoses and Bolts

Carefully remove both the high-pressure and return hoses from the pump. Then unbolt the pump from its bracket.

Step 5: Install the New Pump

Mount the new power steering pump in place. Reconnect all hoses and secure all bolts tightly.

Step 6: Refill Power Steering Fluid

Refill with recommended fluid. Start the engine and turn the wheel lock-to-lock to bleed air from the system. Top off as needed.

Step 7: Test and Inspect

With the engine running, check for leaks and ensure smooth, quiet steering. Reconnect the battery and you’re ready to go!

Why OEM Parts Matter

Using OEM parts ensures compatibility, longevity, and optimal performance. At TLM Auto Parts, we specialize in quality used Acura components, including power steering pumps for TL, TSX, and RL models.

Need the part? Shop power steering pumps now →